















- Compatible with Raspberry Pi Zero or Zero W
- Portable
- High Quality
Play retro games on the go with the Retroflag GPi case which is based on the classic Gameboy DMG design. Measuring at 135*81*32mm, it is a little smaller and a little lighter at 178g. It is the perfect size and more comfortable to hold for extended periods of time than other handhelds. It is powered by a Raspberry Pi Zero W for the best speed vs size performance for retro gaming on Raspberry Pi.
The display is a 2.8 inch 320x240 backlit LCD which is ideal for retro gaming. The GPi display is large, bright and colourful. And, unlike the original Gameboy you do not have to sit under a light to see the screen! It is the ideal retro console with games!
There is a great D-Pad and four gaming buttons (as well as Start and Select) on the front of the case, and located on the back are two shoulder buttons. This gives the best compatibility with a range of classic gaming systems while not detracting from the case design of the retro games handheld.
Keeping with tradition the GPi case is powered by three AAA batteries, or you can use the supplied USB cable with your mobile charger or a phone power bank.
The Retroflag GPi retro gaming handheld can run compatible Micro SD Card images such as RetroPie with games, Lakka & Recalbox builds (all 3 are compared here).The RetroPie runs systems from the 70’s up to the 2000’s.
Please note that some systems are not fully supported and as such some games may not run at full performance. These may be improved in future updates to the software.
Raspberry Pi 3B Specs
SoC: | 1GHz, Single-Core CPU |
RAM: | 512MB LPDDR2 SDRAM |
Wi-Fi: | 802.11 b/g/n wireless LAN |
Bluetooth: | Bluetooth 4.2, Bluetooth Low Energy (BLE) |
Storage: | MicroSD/TF Card Slot - Included 32GB (Depending on the purchased model) |
GPi Case Specs
Material: | High Quality ABS |
Features: | Safe Shutdown/Reset |
Product Dimensions: | (L x W x H): 13.5 x 8.1 x 3.2 cm / 5.31 x 3.10 x 1.25 inches |
Product Weight: | 183gr / 0.40lb |
Package Dimensions: | (L x W x H): 12.60 x 15.00 x 4.50 cm / 4.94 x 5.90 x 1.77 inches |
Package Weight: | 240gr / 0.52lb |
- 1* RETROFLAG GPi Case
- 1* Raspberry Pi Zero W - Installed (If purchased)
- 1* 32GB MicroSD Card
- 1* Charging Cable
Note: Product's appearance and accessories may vary from our sold item. We always make sure that the item we sell matches our Product Description and Technical Specifications
This product comes with a 1 Year Warranty covered by DroiX
Even the best of us can get stuck.
But that's ok. We have loads of options to get Support for your device
Find an answer to all of your questions Resolution Estimate Time: 5 min - 1 hour
Contact Us
When you're stuck, or just can't find what you want - We are here!
- UK: 02037406830 Resolution Estimate Time: 2 hours - 5 hours
- support@droix.co.uk Resolution Estimate Time: 24 hours - 3 days
We have everything covered
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Security

Estimate shipping
You might want to have a look at

- Officially DroiX Supported Product
- 2.4Ghz Wireless Connection
- Compatible with RetroPie, Playstation 3, XBOX 360, PC


- OpenDingux Firmware
- External MicroSD/TF Card Slot
- IPS Display
- 1800mAh Battery

- Open Dingux Operating System
- Portable Gaming Handheld
- Li-Ion Battery
- 8GB MicroSD Card Included
- Allwinner F1C100S Chipset