{"id":70944,"date":"2025-10-10T12:50:08","date_gmt":"2025-10-10T11:50:08","guid":{"rendered":"https:\/\/droix.net\/knowledge-base\/article\/how-to-replace-the-gpd-win-4-triggers-and-controller-boards\/"},"modified":"2025-10-22T16:39:27","modified_gmt":"2025-10-22T15:39:27","slug":"how-to-replace-the-gpd-win-4-triggers-and-controller-boards","status":"publish","type":"kb","link":"https:\/\/droix.net\/knowledge-base\/en-gb\/article\/how-to-replace-the-gpd-win-4-triggers-and-controller-boards\/","title":{"rendered":"How to replace the GPD WIN 4 triggers and controller boards"},"content":{"rendered":"\n

This video guide shows how to replace the GPD WIN 4 Left & Right triggers and their respective controller boards. You will need a Phillips 000 screwdriver, a plastic spudger and ideally a hot air gun or hairdryer to soften the glue on the screw cover strip.<\/p>\n\n\n\n

As always, while we do allow self repairs, any damage caused by yourself is not covered by our warranty (see Terms & Conditions here<\/a>). Please only do so if you feel you are confident that you can do it. Watch the video first, and judge for yourself.<\/p>\n\n\n\n

How to replace the GPD WIN 4 Triggers and controller boards video<\/h2>\n\n\n\n

If you want to replace only the Left Trigger module and\/or board: watch up to 6:05 where the battery is removed, and then skip to 17:48 where we start work on it.<\/p>\n\n\n\n

\n