{"id":77092,"date":"2026-06-05T10:12:16","date_gmt":"2026-06-05T09:12:16","guid":{"rendered":"https:\/\/droix.net\/knowledge-base\/?post_type=kb&p=77092"},"modified":"2026-10-05T13:54:38","modified_gmt":"2026-10-05T12:54:38","password":"","slug":"beelink-ser8-bios-update","status":"publish","type":"docs","link":"https:\/\/droix.net\/knowledge-base\/article\/beelink-ser8-bios-update\/","title":{"rendered":"Beelink SER8 BIOS update – Fixes Windows 11 and AMD graphics drivers issues"},"content":{"rendered":"\n

This guide will show how to update the BIOS on your Beelink<\/a> SER8. This firmware update fixes an issue with recent Windows 11 and AMD graphics driver updates that may cause system freezes, stuttering or random reboots.<\/p>\n\n\n\n

You will need a 64GB or larger USB flash drive for the BIOS files. The drive must be formatted to FAT32 and named “WINPE”.<\/p>\n\n\n\n

This BIOS update is for the Beelink SER8 8745HS\/8845HS models only. Do NOT attempt to install it on other models. Please note that while BIOS updating is generally fine, there are risks. Please ensure you follow all steps correctly, identify that you are installing the correct BIOS for your device. Do not switch off the device unless instructed to. We do not accept responsibility if something goes wrong.<\/mark><\/p>\n\n\n\n

Download the Beelink SER8 BIOS update here<\/a>. Extract the contents of the download. You will have the following files <\/p>\n\n\n

\n
\"Beelink<\/a>
Beelink SER8 BIOS update files<\/figcaption><\/figure>\n<\/div>\n\n\n

Copy these files to the root of you USB drive. Once copied, remove the USB drive and insert it into a USB port on your Beelink SER 8. <\/p>\n\n\n\n

Switch on your Beelink SER8 and tap the F7<\/strong> keyboard key until the Boot Manager menu appears. Highlight the USB Device with the Up and Down arrow keys and Enter to select.<\/p>\n\n\n

\n
\"Beelink<\/a>
Beelink SER8 BIOS Boot Manager<\/figcaption><\/figure>\n<\/div>\n\n\n

In most cases the BIOS should now flash automatically. If so, do NOT switch off or remove the USB drive during the process. This will take a few minutes. wait until the process finishes and you can skip the rest of this guide.<\/p>\n\n\n\n

However, if you are prompted with Shell><\/strong> prompt, type in the drive letter of the USB device. It will show in the list as Removable BlockDevice<\/strong>, in the example image below it is fs3 <\/strong>so you would type in fs3:<\/strong> (remember the colon) and press enter<\/strong>.<\/p>\n\n\n

\n
\"Beelink<\/a>
Beelink SER8 BIOS Removeable Device prompt<\/figcaption><\/figure>\n<\/div>\n\n\n

Next type ls<\/strong> and press enter to show the folder contents, it should show the files on the USB drive.<\/p>\n\n\n

\n
\"Beelink<\/a>
Beelink SER8 BIOS ls prompt<\/figcaption><\/figure>\n<\/div>\n\n\n

Next type Flash <\/strong>, press tab<\/strong>, then press enter<\/strong>. The flashing tool will now start the updating process. Do NOT switch off or remove the USB drive during the process. This will take a few minutes.<\/p>\n\n\n

Popular right now<\/p>

What people are buying this month<\/h2><\/div>

Prices as listed on each store<\/p><\/header>