{"id":91611,"date":"2021-11-20T19:56:43","date_gmt":"2021-11-20T19:56:43","guid":{"rendered":"https:\/\/droix.co.uk\/knowledge-base\/kb\/how-to-install-a-retropie-image\/"},"modified":"2026-10-01T16:36:41","modified_gmt":"2026-10-01T15:36:41","slug":"kaip-idiegti-retropie-atvaizda-i-microsd-hdd-arba-ssd-diska-skirta-raspberry-pi-4","status":"publish","type":"kb","link":"https:\/\/droix.net\/knowledge-base\/lt\/article\/kaip-idiegti-retropie-atvaizda-i-microsd-hdd-arba-ssd-diska-skirta-raspberry-pi-4\/","title":{"rendered":"Kaip \u012fdiegti \u201eRetroPie\u201c atvaizd\u0105 \u012f \u201eMicroSD\u201c, HDD arba SSD disk\u0105, skirt\u0105 \u201eRaspberry Pi 4\u201c"},"content":{"rendered":"\n<p class=\"has-text-align-left wp-block-paragraph\">Sveiki! Vienas m\u016bs\u0173 draugas \u010dia, DroiX, suk\u016br\u0117 nauding\u0105 vaizdo \u012fra\u0161\u0105, kuriame aptariamas procesas, kaip \u012fdiegti \u201eRetroPie\u201c atvaizd\u012f SSD diske (arba 2,5 colio HDD), tod\u0117l man\u0117me, kad bendruomenei b\u016bt\u0173 naudinga paskelbti j\u012f m\u016bs\u0173 \u017eini\u0173 baz\u0117je!<\/p>\n\n\n\n<p class=\"has-text-align-left wp-block-paragraph\">Jei esate susipa\u017ein\u0119 su m\u016bs\u0173 <a href=\"https:\/\/droix.net\/product\/droix-nespi-4-diy-console\/\" class=\"rank-math-link\">RETROFLAG NESPI 4 DIY rinkiniu,<\/a> galite pasteb\u0117ti, kad jis komplektuojamas su tu\u0161\u010diu \u201ekaset\u0117s\u201c korpusu. \u0160i kaset\u0117 skirta laikyti 2,5 colio SSD arba HDD disk\u0105, kur\u012f galima \u012fstatyti \u012f sistem\u0105, kad b\u016bt\u0173 paleista bet kuri OS, kuri\u0105 \u012fdieg\u0117te. Pana\u0161u \u012f kaset\u0117mis pagr\u012fst\u0105 sistem\u0105, kuria stilizuotas NESPI 4!<\/p>\n\n\n\n<p class=\"has-text-align-left wp-block-paragraph\">Da\u017eniausia OS, kuri\u0105 \u017emon\u0117s renkasi paleisti NESPi sistemoje, yra <a href=\"https:\/\/retropie.org.uk\/\" class=\"rank-math-link\" target=\"_blank\" rel=\"noopener\">RetroPie.<\/a> Atvirojo kodo projektas, kurio tikslas \u2013 paversti \u201eRaspberry Pi\u201c kompiuteri\u0173 serij\u0105 pilnavert\u0117mis retro \u017eaidim\u0173 ma\u0161inomis.<\/p>\n\n\n\n<p class=\"has-text-align-left wp-block-paragraph\">Mes suteikiame savo rinkin\u012f su microSD kortele, nes tai lengviausias ir papras\u010diausias b\u016bdas, ta\u010diau tiems, kurie nori naudoti savo SSD\/HDD disk\u0105, per\u017ei\u016br\u0117kite \u017eemiau esant\u012f vaizdo \u012fra\u0161\u0105, kad gautum\u0117te daugiau informacijos apie tai, kaip \u012fdiegti \u201eRetroPie\u201c atvaizd\u012f pasirinktame \u012frenginyje!<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-video-how-to-install-a-retropie-image\">[Video] Kaip \u012fdiegti \u201eRetroPie\u201c atvaizd\u012f<\/h2>\n\n\n\n<figure class=\"wp-block-embed is-type-video is-provider-youtube wp-block-embed-youtube wp-embed-aspect-16-9 wp-has-aspect-ratio\"><div class=\"wp-block-embed__wrapper\">\n<iframe loading=\"lazy\" title=\"How to install a RetroPie image to your MicroSD, HDD or SSD for your Raspberry Pi 4\" width=\"880\" height=\"495\" src=\"https:\/\/www.youtube.com\/embed\/J1fGwdXcKT4?feature=oembed\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen><\/iframe>\n<\/div><\/figure>\n\n\n\n<p class=\"has-text-align-left wp-block-paragraph\">Taip pat para\u0161\u0117me vaizdo \u012fra\u0161o, kuriame paai\u0161kinta, kaip \u012fdiegti \u201eRetroPie\u201c atvaizd\u0105, transkript\u0105 tiems, kurie gali prastai gird\u0117ti arba \u0161iuo metu negali klausytis!<\/p>\n\n\n\n<pre class=\"wp-block-preformatted\"><strong>0:00 Intro<\/strong>\nHello and welcome to Retro Gaming Batner. In this brief video, I will be showing how to install  a pre-built RetroPie image onto your microSD card, hard drive or SSD.\nThe process is quite easy, but if you have never done it before, it can be a bit daunting. At the end, you get to enjoy some retro games. What's there to lose?\n\n<strong> 0:31 Extracting Archive (.rar) files<\/strong>\nOnce you have downloaded the RetroPie image files. They may be in an archive format such as .rar. You will first need to extract the archive to get an image file. If you do not have an archive extractor, then you can download WinRar or 7zip. There are links to both in the description.\nRight-click on the file, and depending on which software you are using, you will see options to extract the archive. Here they are for both WinRar and 7Zip.\nChoose \"extract here\" and it will start to extract the file.\nDepending on the size of the files and your drive speed, this may take some time. So while you're waiting, check out some more of our videos!\n\n<strong> 1:19 How to write an image file to your storage<\/strong>\n\nOnce the extraction process has completed, you should now see a .img file in the same folder. Now, you can write the image file to your Raspberry Pi storage.\nI recommend BalenaEtcher for writing images, as for me at least it's a bit faster than others, and it's also available on Mac and Linux.\nConnect the pi's storage to your pc and run (Balena)Etcher in admin mode. Choose \"flash from file\" and it will bring up the file browser. Locate and select the image file.\nNow, click on \"select target\", it should hide drives that are your Windows drive (for example), but it may not be 100% accurate. You need to select the one that is your microSD card, hard drive, or SSD. It won't be the same name as mine, so check the drive size matches up in particular.\nMake sure you are 100% sure that it is the correct drive. Otherwise you could end up writing over your main drive for example.\nClick on \"flash\" to begin the image flashing process. You will get a warning to ensure that you have chosen the correct device. Double and triple-check and if everything is good, click on \"yes im sure\" to begin flashing.\nDepending on the image size and the speed of data transfer from your pc to the storage, the image writing may take some time. Just let it write the image and go and watch some more of our videos!\n\n<strong> 3:05 After the image has been written<\/strong>\nOnce the process is complete, you can close etcher and safely eject the storage from your PC.\nYou can now connect the storage to your Raspberry Pi and start the first boot.\n\n<strong> 3:27 Useful tips for when first booting a RetroPie image<\/strong>\nThe first time you boot up, the software needs to set up a few things such as re-sizing the disc partition. The time it takes can depend on the size of your storage; for example, resizing a 256GB partition to one TB and also the speed of the storage.\nSo just be patient, let it run for 15 minutes or so. It may also reboot the Pi a couple of times in-between.\nAnd then it should boot up to RetroPie with no issues!\nFuture boots will be faster.\nAnd the final step - enjoy some retro gaming classics!<\/pre>\n\n\n\n<p class=\"wp-block-paragraph\">Tikim\u0117s, kad \u0161is vadovas, kaip \u012fdiegti \u201eRetroPie\u201c atvaizd\u0105, jums buvo naudingas. A\u010di\u016b, kad skyr\u0117te laiko sukurti vaizdo \u012fra\u0161\u0105, <a href=\"https:\/\/www.youtube.com\/channel\/UCoogjKYAtZpoiNyxOHG0nJg?sub_confirmation=1\" class=\"rank-math-link\" target=\"_blank\" rel=\"noopener\">\u201eRetro Gaming Banter\u201c<\/a>!<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Iki kito karto!<\/p>\n","protected":false},"excerpt":{"rendered":"<p>Sveiki! Vienas m\u016bs\u0173 draugas \u010dia, DroiX, suk\u016br\u0117 nauding\u0105 vaizdo \u012fra\u0161\u0105, kuriame aptariamas procesas, kaip \u012fdiegti \u201eRetroPie\u201c atvaizd\u012f SSD diske (arba 2,5 colio HDD), tod\u0117l man\u0117me, kad bendruomenei b\u016bt\u0173 naudinga paskelbti j\u012f m\u016bs\u0173 \u017eini\u0173 baz\u0117je! Jei esate susipa\u017ein\u0119 su m\u016bs\u0173 RETROFLAG NESPI 4 DIY rinkiniu, galite pasteb\u0117ti, kad jis komplektuojamas su tu\u0161\u010diu \u201ekaset\u0117s\u201c korpusu. \u0160i kaset\u0117 [&hellip;]<\/p>\n","protected":false},"author":11,"featured_media":91074,"comment_status":"open","ping_status":"closed","template":"","meta":{"footnotes":""},"kbtopic":[2573,3812],"kbtag":[4694],"kb_category":[4297],"kb_brand":[],"kb_device":[],"kb_section":[4313],"kb_learn":[4305],"class_list":["post-91611","kb","type-kb","status-publish","has-post-thumbnail","hentry","kbtopic-programine-iranga","kbtopic-retropie","kbtag-firmware-lt","kb_category-retro-handhelds","kb_section-os-software","kb_learn-retropie"],"lang":"lt","translations":{"lt":91611,"en":1074,"cs":27656,"da":27671,"de":27688,"en-gb":36080,"es":27705,"fi":27653,"fr":27669,"it":27687,"no":27702,"pl":27718,"pt-pt":27699,"sv":27715,"hr":91509,"lv":91637,"sl":91681,"bg":119810,"nl":119814,"et":119818,"el":119822,"hu":119826,"ro":119830,"sk":119834,"hi":119838,"ja":119842,"ko":119846,"ar":119850},"pll_sync_post":{},"_links":{"self":[{"href":"https:\/\/droix.net\/knowledge-base\/wp-json\/wp\/v2\/kb\/91611","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/droix.net\/knowledge-base\/wp-json\/wp\/v2\/kb"}],"about":[{"href":"https:\/\/droix.net\/knowledge-base\/wp-json\/wp\/v2\/types\/kb"}],"author":[{"embeddable":true,"href":"https:\/\/droix.net\/knowledge-base\/wp-json\/wp\/v2\/users\/11"}],"replies":[{"embeddable":true,"href":"https:\/\/droix.net\/knowledge-base\/wp-json\/wp\/v2\/comments?post=91611"}],"version-history":[{"count":1,"href":"https:\/\/droix.net\/knowledge-base\/wp-json\/wp\/v2\/kb\/91611\/revisions"}],"predecessor-version":[{"id":91612,"href":"https:\/\/droix.net\/knowledge-base\/wp-json\/wp\/v2\/kb\/91611\/revisions\/91612"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/droix.net\/knowledge-base\/wp-json\/wp\/v2\/media\/91074"}],"wp:attachment":[{"href":"https:\/\/droix.net\/knowledge-base\/wp-json\/wp\/v2\/media?parent=91611"}],"wp:term":[{"taxonomy":"kbtopic","embeddable":true,"href":"https:\/\/droix.net\/knowledge-base\/wp-json\/wp\/v2\/kbtopic?post=91611"},{"taxonomy":"kbtag","embeddable":true,"href":"https:\/\/droix.net\/knowledge-base\/wp-json\/wp\/v2\/kbtag?post=91611"},{"taxonomy":"kb_category","embeddable":true,"href":"https:\/\/droix.net\/knowledge-base\/wp-json\/wp\/v2\/kb_category?post=91611"},{"taxonomy":"kb_brand","embeddable":true,"href":"https:\/\/droix.net\/knowledge-base\/wp-json\/wp\/v2\/kb_brand?post=91611"},{"taxonomy":"kb_device","embeddable":true,"href":"https:\/\/droix.net\/knowledge-base\/wp-json\/wp\/v2\/kb_device?post=91611"},{"taxonomy":"kb_section","embeddable":true,"href":"https:\/\/droix.net\/knowledge-base\/wp-json\/wp\/v2\/kb_section?post=91611"},{"taxonomy":"kb_learn","embeddable":true,"href":"https:\/\/droix.net\/knowledge-base\/wp-json\/wp\/v2\/kb_learn?post=91611"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}