{"id":91637,"date":"2021-11-20T19:56:43","date_gmt":"2021-11-20T19:56:43","guid":{"rendered":"https:\/\/droix.co.uk\/knowledge-base\/kb\/how-to-install-a-retropie-image\/"},"modified":"2026-10-01T16:36:43","modified_gmt":"2026-10-01T15:36:43","slug":"ka-instalet-retropie-attelu-microsd-hdd-vai-ssd-diska-raspberry-pi-4-iericei","status":"publish","type":"kb","link":"https:\/\/droix.net\/knowledge-base\/lv\/article\/ka-instalet-retropie-attelu-microsd-hdd-vai-ssd-diska-raspberry-pi-4-iericei\/","title":{"rendered":"K\u0101 instal\u0113t RetroPie att\u0113lu MicroSD, HDD vai SSD disk\u0101 Raspberry Pi 4 ier\u012bcei"},"content":{"rendered":"\n<p class=\"has-text-align-left wp-block-paragraph\">Sveiki! M\u016bsu draugs \u0161eit DroiX ir izveidojis noder\u012bgu video, kur\u0101 aprakst\u012bts process, k\u0101 instal\u0113t RetroPie att\u0113lu SSD disk\u0101 (vai 2.5 collu HDD), t\u0101p\u0113c m\u0113s uzskat\u012bj\u0101m, ka kopienai b\u016btu noder\u012bgi public\u0113t to m\u016bsu zin\u0101\u0161anu b\u0101z\u0113!<\/p>\n\n\n\n<p class=\"has-text-align-left wp-block-paragraph\">Ja esat paz\u012bstams ar m\u016bsu <a href=\"https:\/\/droix.net\/product\/droix-nespi-4-diy-console\/\" class=\"rank-math-link\">RETROFLAG NESPI 4 DIY komplektu,<\/a> j\u016bs var\u0113tu paman\u012bt, ka tas n\u0101k ar dobu &#8220;kartrid\u017eu&#8221;. \u0160o kartrid\u017eu izmanto, lai novietotu 2.5 collu SSD vai HDD, ko p\u0113c tam var ievietot sist\u0113m\u0101, lai palaistu jebkuru taj\u0101 instal\u0113to OS. L\u012bdz\u012bgi k\u0101 kartrid\u017eu balst\u012btai sist\u0113mai, p\u0113c kuras NESPI 4 ir stiliz\u0113ts!<\/p>\n\n\n\n<p class=\"has-text-align-left wp-block-paragraph\">Visbie\u017e\u0101k izv\u0113l\u0113t\u0101 OS, ko cilv\u0113ki palai\u017e NESPi, ir <a href=\"https:\/\/retropie.org.uk\/\" class=\"rank-math-link\" target=\"_blank\" rel=\"noopener\">RetroPie.<\/a> Atv\u0113rt\u0101 koda projekts, kura m\u0113r\u0137is ir p\u0101rv\u0113rst Raspberry Pi dators\u0113rijas pilnv\u0113rt\u012bg\u0101s retro sp\u0113\u013cu ma\u0161\u012bn\u0101s.<\/p>\n\n\n\n<p class=\"has-text-align-left wp-block-paragraph\">M\u0113s nodro\u0161in\u0101m savu komplektu ar microSD karti, jo t\u0101 ir viegl\u0101k\u0101 un \u0113rt\u0101k\u0101 metode, bet tiem, kuri v\u0113las izmantot savu SSD\/HDD, skatiet zem\u0101k eso\u0161o video, lai ieg\u016btu vair\u0101k inform\u0101cijas par to, k\u0101 instal\u0113t RetroPie att\u0113lu sav\u0101 izv\u0113l\u0113taj\u0101 ier\u012bc\u0113!<\/p>\n\n\n\n<h2 class=\"wp-block-heading\" id=\"h-video-how-to-install-a-retropie-image\">[Video] K\u0101 instal\u0113t RetroPie att\u0113lu<\/h2>\n\n\n\n<figure class=\"wp-block-embed is-type-video is-provider-youtube wp-block-embed-youtube wp-embed-aspect-16-9 wp-has-aspect-ratio\"><div class=\"wp-block-embed__wrapper\">\n<iframe loading=\"lazy\" title=\"How to install a RetroPie image to your MicroSD, HDD or SSD for your Raspberry Pi 4\" width=\"880\" height=\"495\" src=\"https:\/\/www.youtube.com\/embed\/J1fGwdXcKT4?feature=oembed\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen><\/iframe>\n<\/div><\/figure>\n\n\n\n<p class=\"has-text-align-left wp-block-paragraph\">M\u0113s esam ar\u012b izveidoju\u0161i video transkripciju par to, k\u0101 instal\u0113t RetroPie att\u0113lu tiem, kam var b\u016bt gr\u016bt\u0101k dzird\u0113t vai kuri \u0161obr\u012bd nevar klaus\u012bties!<\/p>\n\n\n\n<pre class=\"wp-block-preformatted\"><strong>0:00 Intro<\/strong>\nHello and welcome to Retro Gaming Batner. In this brief video, I will be showing how to install  a pre-built RetroPie image onto your microSD card, hard drive or SSD.\nThe process is quite easy, but if you have never done it before, it can be a bit daunting. At the end, you get to enjoy some retro games. What's there to lose?\n\n<strong> 0:31 Extracting Archive (.rar) files<\/strong>\nOnce you have downloaded the RetroPie image files. They may be in an archive format such as .rar. You will first need to extract the archive to get an image file. If you do not have an archive extractor, then you can download WinRar or 7zip. There are links to both in the description.\nRight-click on the file, and depending on which software you are using, you will see options to extract the archive. Here they are for both WinRar and 7Zip.\nChoose \"extract here\" and it will start to extract the file.\nDepending on the size of the files and your drive speed, this may take some time. So while you're waiting, check out some more of our videos!\n\n<strong> 1:19 How to write an image file to your storage<\/strong>\n\nOnce the extraction process has completed, you should now see a .img file in the same folder. Now, you can write the image file to your Raspberry Pi storage.\nI recommend BalenaEtcher for writing images, as for me at least it's a bit faster than others, and it's also available on Mac and Linux.\nConnect the pi's storage to your pc and run (Balena)Etcher in admin mode. Choose \"flash from file\" and it will bring up the file browser. Locate and select the image file.\nNow, click on \"select target\", it should hide drives that are your Windows drive (for example), but it may not be 100% accurate. You need to select the one that is your microSD card, hard drive, or SSD. It won't be the same name as mine, so check the drive size matches up in particular.\nMake sure you are 100% sure that it is the correct drive. Otherwise you could end up writing over your main drive for example.\nClick on \"flash\" to begin the image flashing process. You will get a warning to ensure that you have chosen the correct device. Double and triple-check and if everything is good, click on \"yes im sure\" to begin flashing.\nDepending on the image size and the speed of data transfer from your pc to the storage, the image writing may take some time. Just let it write the image and go and watch some more of our videos!\n\n<strong> 3:05 After the image has been written<\/strong>\nOnce the process is complete, you can close etcher and safely eject the storage from your PC.\nYou can now connect the storage to your Raspberry Pi and start the first boot.\n\n<strong> 3:27 Useful tips for when first booting a RetroPie image<\/strong>\nThe first time you boot up, the software needs to set up a few things such as re-sizing the disc partition. The time it takes can depend on the size of your storage; for example, resizing a 256GB partition to one TB and also the speed of the storage.\nSo just be patient, let it run for 15 minutes or so. It may also reboot the Pi a couple of times in-between.\nAnd then it should boot up to RetroPie with no issues!\nFuture boots will be faster.\nAnd the final step - enjoy some retro gaming classics!<\/pre>\n\n\n\n<p class=\"wp-block-paragraph\">M\u0113s ceram, ka \u0161is ce\u013cvedis par to, k\u0101 instal\u0113t RetroPie att\u0113lu, ir bijis noder\u012bgs. Paldies, ka velt\u012bj\u0101t laiku video izveidei, <a href=\"https:\/\/www.youtube.com\/channel\/UCoogjKYAtZpoiNyxOHG0nJg?sub_confirmation=1\" class=\"rank-math-link\" target=\"_blank\" rel=\"noopener\">Retro Gaming Banter<\/a>!<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">L\u012bdz n\u0101kamajai reizei!<\/p>\n","protected":false},"excerpt":{"rendered":"<p>Sveiki! M\u016bsu draugs \u0161eit DroiX ir izveidojis noder\u012bgu video, kur\u0101 aprakst\u012bts process, k\u0101 instal\u0113t RetroPie att\u0113lu SSD disk\u0101 (vai 2.5 collu HDD), t\u0101p\u0113c m\u0113s uzskat\u012bj\u0101m, ka kopienai b\u016btu noder\u012bgi public\u0113t to m\u016bsu zin\u0101\u0161anu b\u0101z\u0113! Ja esat paz\u012bstams ar m\u016bsu RETROFLAG NESPI 4 DIY komplektu, j\u016bs var\u0113tu paman\u012bt, ka tas n\u0101k ar dobu &#8220;kartrid\u017eu&#8221;. \u0160o kartrid\u017eu [&hellip;]<\/p>\n","protected":false},"author":11,"featured_media":91075,"comment_status":"open","ping_status":"closed","template":"","meta":{"footnotes":""},"kbtopic":[2567,3807],"kbtag":[4693],"kb_category":[4297],"kb_brand":[],"kb_device":[],"kb_section":[4313],"kb_learn":[4305],"class_list":["post-91637","kb","type-kb","status-publish","has-post-thumbnail","hentry","kbtopic-programmatura","kbtopic-retropie","kbtag-firmware-lv","kb_category-retro-handhelds","kb_section-os-software","kb_learn-retropie"],"lang":"lv","translations":{"lv":91637,"en":1074,"cs":27656,"da":27671,"de":27688,"en-gb":36080,"es":27705,"fi":27653,"fr":27669,"it":27687,"no":27702,"pl":27718,"pt-pt":27699,"sv":27715,"hr":91509,"lt":91611,"sl":91681,"bg":119810,"nl":119814,"et":119818,"el":119822,"hu":119826,"ro":119830,"sk":119834,"hi":119838,"ja":119842,"ko":119846,"ar":119850},"pll_sync_post":{},"_links":{"self":[{"href":"https:\/\/droix.net\/knowledge-base\/wp-json\/wp\/v2\/kb\/91637","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/droix.net\/knowledge-base\/wp-json\/wp\/v2\/kb"}],"about":[{"href":"https:\/\/droix.net\/knowledge-base\/wp-json\/wp\/v2\/types\/kb"}],"author":[{"embeddable":true,"href":"https:\/\/droix.net\/knowledge-base\/wp-json\/wp\/v2\/users\/11"}],"replies":[{"embeddable":true,"href":"https:\/\/droix.net\/knowledge-base\/wp-json\/wp\/v2\/comments?post=91637"}],"version-history":[{"count":1,"href":"https:\/\/droix.net\/knowledge-base\/wp-json\/wp\/v2\/kb\/91637\/revisions"}],"predecessor-version":[{"id":91638,"href":"https:\/\/droix.net\/knowledge-base\/wp-json\/wp\/v2\/kb\/91637\/revisions\/91638"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/droix.net\/knowledge-base\/wp-json\/wp\/v2\/media\/91075"}],"wp:attachment":[{"href":"https:\/\/droix.net\/knowledge-base\/wp-json\/wp\/v2\/media?parent=91637"}],"wp:term":[{"taxonomy":"kbtopic","embeddable":true,"href":"https:\/\/droix.net\/knowledge-base\/wp-json\/wp\/v2\/kbtopic?post=91637"},{"taxonomy":"kbtag","embeddable":true,"href":"https:\/\/droix.net\/knowledge-base\/wp-json\/wp\/v2\/kbtag?post=91637"},{"taxonomy":"kb_category","embeddable":true,"href":"https:\/\/droix.net\/knowledge-base\/wp-json\/wp\/v2\/kb_category?post=91637"},{"taxonomy":"kb_brand","embeddable":true,"href":"https:\/\/droix.net\/knowledge-base\/wp-json\/wp\/v2\/kb_brand?post=91637"},{"taxonomy":"kb_device","embeddable":true,"href":"https:\/\/droix.net\/knowledge-base\/wp-json\/wp\/v2\/kb_device?post=91637"},{"taxonomy":"kb_section","embeddable":true,"href":"https:\/\/droix.net\/knowledge-base\/wp-json\/wp\/v2\/kb_section?post=91637"},{"taxonomy":"kb_learn","embeddable":true,"href":"https:\/\/droix.net\/knowledge-base\/wp-json\/wp\/v2\/kb_learn?post=91637"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}