This video will show you step by step on how to change the display on a GPD WIN 4. You will need a few tools including a spudger, hot air gun or a hairdryer to soften the glue holding the display in place. A hot air gun is preferable, but an hairdryer can be used though it may take longer to soften the glue.
As always, while we do allow self repairs, any damage caused by yourself is not covered by our warranty (see Terms & Conditions here). Please only do so if you feel you are confident that you can do it. Watch the video first, and judge for yourself.
How to replace the GPD WIN 4 SSD Video
00:00 How to replace the GPD WIN 4 SSD
00:05 Remove the case screws
00:28 Remove the bottom case strip
01:07 Remove the old glue
01:23 Remove the two case screws
01:41 Open the case
02:26 Slowly separate the case
02:45 Some more screws
03:13 Optional battery disconnect
04:10 Replacing the SSD
04:40 Reconnecting the battery
05:33 Putting everything back together
07:49 Like & Subscribe
Questions & answers